STABILIZERS FOR
     
     
 
 
 
   
 
 
 
 Physical Form
 Fine White Powder
 Moisture
 0.25% Max
 Total Lead as PbO
 88% Min.
 Bulk density
 1.2-1.5 gm/cc
 Specific Gravity
 6.3 – 6.8
 Fineness
 600 Mesh
 Particle Size
 less than 10 micron
 
     
     
   
     
 
Stabilizer TBLS is a non-Lubricating type of Stabilizer, and should be used in conjunction with stabilizers such as LS, DBLS and CS . Any application where good heat and light stability is required it should used in conjunction with stabilizer DBL Phos ( DIBASIC LEAD PHOSPHITE ) which is a good heat and light stabilizer.
 
     
     
   
     
 

It finds an application in both rigid and flexible PVC formulations for PVC Pipes, Profiles, Sheets, Tubings and reinforced suction hoses. TBLS is popularly used in insulation / sheathing compound for wires and cables. In practice TBLS is used in combination with the above mentioned stabilizers to obtain optimum results.

 
     
   
     
  Depending upon the application, the dosage of stabilizer recommended is 2-6 parts of PVC Resin .  
     
 

PACKING : 25 Kg HDPE WOVEN SACKS WITH PLASTIC LINER.

 
     
  For detailed specification kindly contact at : sales@goldstab.com